1.Could the power will be increased easily after shipping ie add a module?
It is IPG laser source, for IPG laser source, the laser increasing is really slowly than other brands, no need to add one module, i confirme with IPG engineer.
2.What is the max cutting speed before adding an absolute position to 90 degree corners?
It depends on different material and thickness
if 6mm aluminum,the maximum cutting speed is about 2-3000mm/minute
if higher, then can not cut it off
if lower,then the corner will be burned.
3.The nesting function is in the control system?
Yes, you can do this nesting work in the control system.
4.Do your slat just pull out or do several thing have to be taken apart.
Just pull out, no need do other jobs,no screws.
5.Could the laser detect when the material is no longer cutting.
Yes,the laser can detect.
our machine with the alarm system.
If there is any small problem of the machine, the alarm system will warning, and then machine will not working, appear notification in the control software, and you could check it, change the problems.
